Bodice - Under Arm Issues

The bodice pattern for the My Life As A.....doll was cut out and made. I followed the instruction in the bodice tutorial I wrote. It fit the doll like the it should in the chest and waist. But under the arm was another story. 

It is too far down for my liking. So we begin to fix the under arm part of the pattern. I drew the pattern onto paper so you can see what we plan on doing. 

The underarm seam allowance will be added to so it will cover more of the bodice and fit closer to the arm. 
First I measured under the arm of the doll. It is 1/4" that needs to be added.

I used some scraps of the tracing pellon and added 1/4" to the underarm seam and blended it in. I started about 1/2" up the arm hole at nothing and redrew the line to the underarm. 

The next muslin is ready to make. 
Happy Doll Sewing................................

Bodice Sloper/Pattern Tutorial

A slight deviation from sewing historical clothing but a subject that is very important to those who collect dolls that are not American dolls. I will be discussing how to make a bodice pattern for those dolls. 

The Models

Measurements of the Dolls

	Pleasant Company AG	Mattel AG	CITITOY MY LIfe AS GIRL	CitiToy My LIfe As Boy
height	18" / 46cm	18" / 46cm	18 1/2" / 47cm	18 1/2" / 47cm
head	12 1/4" / 32cm	12" / 30.5cm	12 1/2" / 32 cm	13" /33cm
chest	11 1/2" / 29cm	11 1/4" /28.5cm	11" / 28cm	10 1/2" / 27cm
waist	11 1/4" /28.5cm	10 1/2" / 27cm	11" / 28cm	9 1/2" / 24cm
hips	12 1/2" / 32cm	12" / 30.5cm	11 3/4" / 30cm	10 1/2" / 27cm

Materials Needed

•  18" doll pattern. Mine is Butterick 6265. Front and back pieces are needed.

• tracing paper or pellon. I can get this at my local shops or look for it here.
• pen (you can use a sharpie or a water soluble pen)
• 1/4 meter of broadcloth or other muslin type fabric. I like broadcloth for doll muslins.
• contrasting thread
• pins, scissors, tape measure

Process

• Trace the 2 pattern pieces onto the tracing pellon. Cut them out. You will notice I have the bodice cut out as a full bodice. You don't need to do it but if you do put the fold line down the middle. Lay the pieces onto your fabric as shown. 

• Thread your machine with a contrasting thread. I chose a bright yellow so it would stand out. 
• Using a regular stitch length start to stitch 1/4" from the neck and sleeve edges. This is your stitching line and you will be needing this later on. 

• You will notice that the center back line is 1/2" from the cut edge. You will stitch the center backs 1/4" and 1/2" from the cut edge. 

• Sew the front and backs together at the shoulder seams. Press open (which I hadn't done in this picture).

• Sew up the side seams using a longer stitch. This is just in case you need to rip them out. 

• Try it on your doll. I put mine on the American Girl doll first and then onto the My Life As A......doll to see the comparison. You can see the difference.

• The starting point for me was the back. I pinned the back in 1/2" (second stitch line from the cut edge) and pressed it. 

• I then put it back on the doll and folded it over 1/2" and pinned it in place. The back was looking better but the front had this too big in the center front issue. 

• I removed the bodice, folded it carefully in half down the center front and stitched a 1/8" seam. I pressed it to one side and tried it on the doll. A very good fit. The curve at the neckline looked good so I didn't note to fix it up when drawing the pattern again. 

• I checked the under arms and they are fitting well. If they are too low in another muslin, I would draw a new line up to fill in that spot. Very easy to do. 

• I knew the under arm was two different lengths so kept that in mind while I traced a new pattern. The new pattern is exactly as the old one so we can do our modifications on it. Label your pieces with front and back. 

• The first job is to remove 1/8" from the center front. I also printed fold on that edge. 

• I next cut 1/2 inch off the center back. 

• I also drew the 1/4" and 1/2" lines at the center back. I also drew 1/4 lines at the side seams. 

• Next up we will true the bottom edge. Lay the front and back side by side with the seam line on top of each other. 

• The front is a tiny bit longer than the back. I cut that extra bit off and it was trued up. That 1/16th" isn't noticeable until you start to sew the side seams up. 

Your pattern is done. Write your doll's name (My Life As...Walmart for me) on the pattern pieces. You are ready to make another muslin to see how much better this bodice fits. I'll be making mine in a couple of days so you can see how it turned out. 

Happy Doll Sewing...............................

What's On My Mind - Undergarments

I'm taking a bit of a break from doll sewing and allowing myself some time to think about

• what level do I want to take my doll sewing to
• what do I want to make next
• how am I going to deal with the inventory I have

As I put items I've made into the inventory bin, I haven't been keen on selling them. I don't think they are perfect enough on the inside. I've serged as many seams as possible and used a triple zig-zag stitch on others. I know others use these seam finishes and are successful at selling their items. Something wants me to make the finish on my doll clothes different. 
The first question for me is what level do I want to take my doll sewing to. 

• Serger and zig-zag 
• Couture sewing only
• Combination of both

As I have the Couture Sewing Academy, I will be focusing on couture seam finishes. I love the way clothing looks when the steps are taken to do couture work. 
I want to try french seams first. With that in mind, I watched the video on this topic. With my mind rolling about what I needed to do to achieve this, I thought about something that would be easy to do.
Which brought me to the second question; what do I want to sew next.

• Modern (today's look)
• Historical (1850's to 1880's, Edwardian, 1920's)
• Whimsical

The 1850's to 1880's won out. I have a nice selection of patterns in this era that I can learn to do couture sewing on. With that decided upon, I have decided to work on undergarment for this era. I can easily do french seams on the drawers or pantalettes. 

McCalls 7227 OOP

I've decided to start with this pattern as it is fairly easy to sew. Though out of production (OOP), it can still be bought on Etsy. The goal is do the undergarments for this pattern, Kirsten's Pretty Clothes (free), and Thimble & Acorn's Victorian Unmentionables all of which I have. I feel I will have plenty of opportunity to learn how to do french seams. 

I will be starting this pattern shortly. I have assembled the pattern, fabric, lace all from the stash. Under the pattern is the pattern tracing pellon use. 

As I prepare the pattern, I will tutorial how I did each step to make the drawers with french seams. Join in if you wish. 
I haven't answered the last question but will be going over my inventory with a fine tooth comb to see how I am going to deal with it. 
Happy Doll Sewing.......................

How To Make A Three Tiered Skirt

It is time for another tutorial and this one is on how to make a long 3 tiered skirt. My inspiration for this skirt came from this mood board I made in February with pictures I had found a couple of years ago and my fabric idea.

Supplies

12" by with of fabric for skirt
3/8" no roll elastic
thread

Chart

When I made my skirt, I used the doll's hip measurement. I would now use this chart for the hip measurement. 

Doll's Measurement Chart

Preparing the Fabric

The pieces of fabric need to total 12" in length when laid flat and not sewn together. My top pieces was not quite 4" and the bottom piece was over 4". In total I had 12". I would be more inclined to have these measurements the next time

Top Tier - 3.5"

Middle Tier - 4"

Bottom Tier - 4.5"

Top Tier

This tier is the most important of all the tiers for fitting the doll. The American Girl doll has a hip measurement of up to 12 1/4". Add 1/2" for ease and 1/2" for seam allowances. This is a total of 13 1/4". Cut this piece and set it aside. 

Middle Tier

I chose to have a gather of 1.5 times fuller than the top tier. To get the measurement you multiply 13 1/4 x 1.5 for a total width of 19 3/4". I cut the piece 20" and set it aside. 

Bottom Tier

 We do the math again. 20 x 1.5 for a total width of 30". I cut it and set it aside. 

Sewing

• On all three pieces, finish all the raw edges
• Sew the short sides of each tier and press open. You will have three tubes. 
• On the middle tier, run two gathering rows around the top of the tube. Gather the tube to fit the top tube and sew on matching the seams. Press the seam up towards the top tier. 
• Gather the bottom tier and attach to the skirt. Press the seam up. 

Your skirt will look like this when done. 

• Press under 1/2" for the waist. Stitch down close to the finished edge leaving a 2-3" opening at the seam.
• Cut a piece of elastic 11" long. Thread through the waist casing and sew together overlapping the ends. Stitch down the opening being careful not to catch the elastic.
• Hem the skirt. I did a 1/4" hem as it was the length I wanted the skirt to be. 

Conclusion

Though my example has a south western vibe to it, I can see this skirt in florals. If you are uncertain about the length, do a muslin out of muslin or scrap fabric. I did a lot of measuring with the thought that the hem could be deeper. If it wasn't, I had enough fabric left over to make the third tier again. 

Happy Doll Sewing..............................

Make Do With What I Have

The last year I was working, I purchased quite a bit of fabric for the dolls. It was called inventory. I was also given several pieces to add to the inventory. And it fills 4 tubs. As I sewed doll outfits to display in the store, I got some patterns and I bought more when they came on sale. I also got a lot of free patterns from Pixie Faire through their Freebie Friday and pattern testing. Add lace and buttons and I'm set for quite a while. 

Though not full here, the closet is now full and 80% is for the dolls. 
Though I love looking and buying fabric for the dolls I am learning that I must

MAKE DO WITH WHAT I HAVE

Use up what fabric I have on hand. 

• I really wanted to make this dress with new fabric but I hunted through the stash, found the fabric, matching ribbon and thread and started the dress. Another search found the lace trim that I added. It actually turned out better than I had thought. 

• Use up the whole piece of fabric. Having it sit on the shelf or in a tub means I have to come back to it again. It is still stash. While the fabric was perking in my mind, I finished sewing it up. I only purchased the white cotton eyelet for the skirt. I now have that fabric gone and two doll outfits in the inventory tub. 

Pattern Alterations and Hacks

• Oh Sew Kat got me thinking in this direction when she added lace to her Four Season skirt pattern. I am looking at adding a different fabric instead of lace to give a coordinating look to an outfit. And tulle could be added underneath. Several different looks from one pattern. 
• Using a bodice as a top. I took the bodice from Butterick  6265 and lengthened it 1/2". I'd like to add 3/4" the next time. I made the bodice the same as I usually do to make a dress. I serged the bottom edge and turned it up less than 1/4" for a finished edge. Perfect to go with this skirt. At this length, I can add a 2.5" gathered peplum as Oh Sew Kat did for one of her dresses. Or I can draft one from the course I took. That will all happen. 

Conclusion

• If you need patterns buy them. I have well over 100 patterns in my inventory and I need to focus on using them. This doesn't mean I won't be buying more patterns as I will be. What I'm trying to do is sew more of the patterns I have.
• It is nice to have a small inventory of doll fabrics and trims. Having as much as I do has put me over my stress threshold. Also, I bought a lot of .5 meter (20") lengths and I am realizing they are not enough for some of the patterns I have acquired. I have to think basic once again but I'm happy with that. When I buy, I now pair a pattern to the fabric and it remains as that. 

This is a brief plan of what I am doing at this moment. It is making me think hard about a lot of things. Thank you Oh Sew Kat for making me think outside of my mindset.
Happy Doll Sewing.......................................

Designer's Patterns, Hacks, and Tutorials

It has been a while since I last posted. I've been busy with other things and haven't done any sewing for the dolls. But, it doesn't mean I'm not thinking and designing. And searching the internet. 
On my morning excursion, I looked at Oh Sew Kat. I saw this designer mentioned in a post on Facebook. I am so happy I did and wanted to share her with you. (I have no affiliation with her at all; I discovered her this morning.)

Oh Sew Kat and Her Tutorials and Hacks

This designer has basic patterns that a beginner can make with success. And, what I love about her is her pattern hacks and tutorials. They are graciously shared on her blog. 

When I was looking for her skirt hack/tutorial, I didn't realize her Four Season Skirt pattern is free if you sign up. And, she tells you how to add lace to this skirt that even a beginner can handle. How neat is that.

When I saw the skirt, I knew I wanted to make it to go with some knitted items I have planned. Plain or with lace depending on the season or look. I'm also looking at her Popsicle Top for an easy sleeveless cotton top to go with the skirt and knitted items. 

But what else did I like about her pattern hacks and tutorials? Changing her Sugar and Spice dress into a peplum top. This top goes well over leggings, capris, and her Sixth Grade Skirt pattern. I didn't stop at these two tutorials/hacks. I only chose these two to give you an idea of what is on her blog. 

It is designers like this that make me purchase their patterns. Acquiring one for free is a bonus. I am already thinking about what fabric from the doll's stash I'm going to use. 

Thank you Oh Sew Kat for sharing what you can do with your patterns. 

Happy Doll Sewing................

Sewing A Summer Sunhat

I made the sunhat in this pattern.

McCalls 6451

I've made it twice before and have done some changes so no seams show on the inside. 

Cutting Out

• The three pieces use up a lot of fabric so you can cut out inside of the crown and the top in a plain fabric if you want to. If you want a one color hat, do not cut out the inside brim in plain as it is seen.
• You can use different prints for this hat if the outfit you have made has those prints in it. 
• Plaids - I folded the fabric on a dominate line. When I lay down the brim pieces I make sure they are going to be the same on both the inside and outside. You can use the word "McCalls" to sit on a straight line to help you match up the plaids. 

Interfacing

• The outside layer of the hat is interfaced. Do not skip this step. 
• For the first two hats I used a fusible knit interfacing and it was okay. The plaid hat has a light weight fusible cotton interfacing (Pellon) for a bit of extra support. 

Sewing Preparation

• The top of the hat is a circle. I snipped the circle for the center front and back so I know the circle will be on the straight of the grain when I put it into hat. 
• Apply the interfacing and trim to make sure is the same size as the outer fabric pieces. 

Sewing the Brim

• I followed the instructions for the brim.  
• I decided to top stitch it light grey so it doesn't show much. I didn't want it as a feature. 

 

Sewing The Crown

From here on I don't follow the pattern.

• After sewing the crown together, mark it and the circle into quarters. 
• Start pinning the circle to the crown making sure the center fronts and backs match. Then do the sides. Pin between the quarters. Take your time and use lots of pins.

• Baste the seam as it allows you to have a better opportunity to stitch more accurately. 

• Stitch with the circle face up. Remove basting. 

• Turn right side out and start pressing. The seam allowance folds down to the brim not up to the circle. 

Just before I pressed it. See how the red line at the front goes up over the brim to the top of the hat.

• Repeat for the lining. 
• I sewed a basting line 1/4" from the bottom of the crown. This line will be folded under when hand sewing the crown to the brim. 

Attaching the Crown

• Divide both the outer crown and brim into quarters. Pin together using lots of pins. 

• Sew the crown and brim using 1/4" seam. 

• Press well so the seam faces into the crown. 

Attaching the Lining

• Fold under the basting line on the crown lining at the seam allowance. 
• Fit the crown lining with wrong sides together onto the crown starting at the seam allowance. 
• Work your way around the hat making sure the lining is straight on the crown. I marked my crowns at center front to help me. 
• Turn under the lining at the basting line and pin into place. 
• I measured where the elastic went and pinned it in place while I hand sewed.
• Hand stitch the lining into place making sure your stitches don't show on the right side of the hat. You will have no seams showing. 

• Sew the elastic in place according to the directions. It is quite simple to do. 

Finishing Touches

• When you have turned the hat right side out, give it a bit of a press and decide on how you will decorate the hat. For this hat I decided to put a grosgrain ribbon around the crown and add a bow at the back. 

I do love this hat pattern. It is one that is a go to to complete a summer outfit. 

To complete this outfit (at the moment), I will be knitting a red bolero. 

Happy Doll Sewing.................................